<p id="n5u9n"><strong id="n5u9n"><small id="n5u9n"></small></strong></p>

    <table id="n5u9n"></table>

    您好,歡迎光臨萊州聚峰機械有限公司官方網站! 鄭重聲明 購機 售后 聚峰官微

    全國咨詢熱線

    400-879-1999

    您的位置: 首頁 > 新聞資訊 > 合作資訊 >
    混凝土自動上料攪拌車操作過程
    來源:http://www.jifengmenye.com/ 日期:2022-05-13
    混凝土自動上料攪拌車操作過程
    Operation process of automatic concrete loading mixer
    混凝土自動上料攪拌車正確的操作過程:
    Correct operation process of automatic concrete loading mixer:
    一:在操作自動喂料攪拌機時,腳跟靠近駕駛室的地板,腳踏板和加速踏板保持平行,并且加速踏板緩慢踩下。
    1: When operating the automatic feeding mixer, keep the heel close to the floor of the cab, keep the pedal parallel to the accelerator pedal, and press the accelerator pedal slowly.
    2:自動進紙混合器運行時,節氣門應始終保持穩定。在正常工況下,節氣門開度約為70%。
    2: When the automatic feed mixer is running, the throttle should always be stable. Under normal working conditions, the throttle opening is about 70%.
    3:操作自動上料攪拌機時,腳踏板應與制動踏板分開,并平放在駕駛室地板上。自動裝載攪拌機通常在不平坦的建筑工地上工作。如果您的腳一直踩在制動踏板上,您的身體會上下移動,駕駛員會無意間踩到制動踏板。通常情況下,有必要通過控制節氣門的減速度來控制發動機和變速齒輪的狀態。這不僅避免了頻繁的制動和制動系統的過熱,而且還提高了自動供料攪拌機的便利性。
    3: When the mixer is operated, the pedal shall be placed on the floor of the automatic cab and separated from the brake pedal. Automatic loading mixers usually work on uneven construction sites. If you keep your foot on the brake pedal, your body will move up and down, and the driver will inadvertently step on the brake pedal. Usually, it is necessary to control the state of the engine and transmission gear by controlling the deceleration of the throttle. This not only avoids frequent braking and overheating of the braking system, but also improves the convenience of the automatic feeding mixer.
    4:在操作自動供料攪拌機時,尤其是在操作鏟斗時,需要在節流閥穩定的同時定期向上提起提升桿和鏟斗操作桿,以向鏟斗中填充物料。
    4: When operating the automatic feeding mixer, especially when operating the bucket, it is necessary to lift the lifting lever and bucket operating lever regularly while the throttle valve is stable, so as to fill the bucket with materials.
    5:禁止輪胎側滑。當混凝土自動上料攪拌車運行時,遇到阻力時,加速器突然踩踏,輪胎經常打滑。此現象通常是由不當的駕駛員操作引起的。
    5: Tire sideslip is prohibited. When the automatic concrete loading mixer truck runs, when it encounters resistance, the accelerator suddenly steps on it and the tires often slip. This phenomenon is usually caused by improper driver operation.
    這將增加油耗并損壞輪胎。二是防止后輪傾斜。由于自動上料攪拌機的鉆孔能力強,駕駛員通常會鏟掉堅硬的原土和落基山脈。如果操作不正確,則將兩個后輪簡單地抬離地面。提升操作的地面慣性導致鏟斗葉片破裂和變形。如果后輪高,鋼板以及前框架和后框架等焊接部件都會斷裂。三是禁止上山。剃刮普通物料時,自動飼料攪拌機以2檔運行,并且禁止慣性沖擊2檔以上的齒輪組。
    This will increase fuel consumption and damage tires. The second is to prevent the rear wheel from tilting. Due to the strong drilling capacity of the automatic loading mixer, the driver usually shovel off the hard original soil and rocky mountains. If the operation is not correct, simply lift the two rear wheels off the ground. The ground inertia of the lifting operation causes the bucket blades to break and deform. If the rear wheel is high, the steel plate and welding parts such as front frame and rear frame will break. Third, it is forbidden to go up the mountain. When shaving ordinary materials, the automatic feed mixer operates in gear 2, and inertial impact on gear sets above gear 2 is prohibited.
    本文的精彩內容中科攪拌車價格提供知識提供,本網站還有很多的精彩內容,更多的內容您可以點擊進入:http://www.jifengmenye.com我們有專門的客服為您解答問題
    The wonderful content of this article provides knowledge about the price of Zhongke mixer truck. There are many wonderful contents on this website. You can click to enter more contents: http://www.jifengmenye.com We have special customer service to answer your questions
    久久无码人妻一区二区三区
      <p id="n5u9n"><strong id="n5u9n"><small id="n5u9n"></small></strong></p>

      <table id="n5u9n"></table>